新闻资讯


NEWS CENTER

The membrane deamination process should be controlled at 40°C、What is the highest temperature it can withstand? What will happen at low temperatures?


Release time:

2024-05-14

the maximum temperature of the deamination system should generally not exceed 55℃.

The membrane deamination process should be controlled at 40°C、What is the highest temperature it can withstand? What will happen at low temperatures?

The operating temperature of the entire system is 40~50℃, while PTFE membrane fiber can withstand a temperature of about 100℃, and UPVC material can withstand a temperature of 55℃, so the maximum temperature of the deamination system should generally not exceed 55℃.
If the water temperature decreases, the deamination efficiency will decrease. When the water temperature decreases from 40°C to 30°C, the deamination efficiency will drop by more than 20%. The lower the temperature, the worse the deamination efficiency.