International supplier of functional membrane separation materials and solutions
Membrane technology changes life
Flow cytometer degassing membrane
Classification:
Product Description
Flow cytometer degassing membrane
In view of the diversity and chemical characteristics of flow cytometer mobile phases, SCI-NANO has developed a degassing membrane product SDG-02 with excellent corrosion resistance, chemical stability and excellent compatibility. This component uses PTFE membrane filaments, which has excellent hydrophobicity, can withstand organic solvents with low surface tension, and has a long service life.
SCI-NANO's unique membrane filament weaving arrangement technology is used inside the component, which not only increases the fluid diffusion path, but also increases the flow rate.
SCI-NANO flow cytometer degassing membrane products are small in size, can achieve low flow restrictions, and are widely used in all flow rate ranges, including up to 10mL/min or higher (depending on the system type). In addition, the membrane filaments made of polytetrafluoroethylene enable Konano flow cytometer degassing membrane components to achieve the highest performance solvent degassing in analytical-grade systems. The component has excellent universal solvent compatibility and constant flow restrictions, is suitable for a variety of environments, and is not affected by the exhaust solvent vapor during high-pressure vacuum degassing, thereby achieving the highest degassing efficiency while reducing the risk of pervaporation and related mobile phase changes.
Component product advantage：
(1) Unique structural design, occupying small space.
(2) Constant flow limit, high dissolved oxygen removal rate.
(3) Not interfered by solvent vapor emitted during high-pressure vacuum degassing.
(4) Excellent universal solvent compatibility and efficient online gas removal rate.
(5) Using SCINANO-PTFE super-water-repellent hollow fiber membrane, the components have long service life.
(6) Able to achieve the highest HPLC degassing efficiency while reducing pervaporation and related mobile phase changes.
Product parameter table：
|
Size (length*width*height) |
108*65*24（mm） |
|
Internal volume |
0.5mL |
|
Liquid connection |
Thread ¼-28 |
|
Maximum flow |
10 mL/min |
|
Maximum rated pressure |
0.2MPa |
|
Membrane type |
PTFE film |
|
Operating temperature |
1~60（°C） |
|
Vacuum connection |
4mm rubber hose |
|
Liquid |
PEEK、PTFE |
Key words： Flow cytometer degassing membrane
Previous Page
Next Page
Previous Page
Next Page
Recommended Products
Welcome your message consultation